Lithium-Ion Battery Charging Cabinet – Specifications

Specifications

This lithium-ion battery charging cabinet is designed to support safer indoor charging and organized battery storage for e-bike batteries and other lithium-powered devices. Specifications below are provided to help you confirm fit, electrical compatibility, and installation requirements before purchase.

1. Electrical & Power Requirements

  • Input Voltage: 120V AC, 60Hz (US version) 
  • Max. Power : 2200W
  • Max. Current: 20A
  • Integrated Power Strip: 3-outlet grounded power strip with overload and over-voltage protection
  • Charging Support: Suitable for multiple standard lithium-ion battery chargers

2. Charging Capacity & Interior Fit

  • Recommended Battery Type: Lithium-ion battery packs (commonly used in power tools, drones, and e-bikes)
  • Typical Charging Quantity:
    • Urban model: 1–3 battery packs (compact setup)
    • Workshop model: 1–6 battery packs (extended setup)
  • Shelf Design: Adjustable steel shelve designed to promote airflow during charging.
  • Load Rating: Designed for evenly distributed battery and charger weight

Battery Cabinet Specifications

All dimensions are shown in inches (W × D × H).

Specification Urban Model Workshop Model
Exterior Dimensions 18.11" W × 20.47" D × 24.41" H

23.23" W × 18.11" D × 44.09" H
Interior Usable Dimensions

13.78" W × 14.96" D × 14.96" H

20.08" W × 14.96" D × 37.01" H
Shipping Dimensions 18.11" W × 20.47" D × 24.41" H

25.59" W × 20.47" D × 46.06" H
Net / Gross Weight 46.3 lbs (21 kg) / 52.9 lbs (24 kg)

92.6 lbs (42 kg) / 103.6 lbs (47 kg)
Shelf Payload  66.13 lbs (30 kg)

 66.13 lbs (30 kg)
Total Payload 198.41 lbs (90 kg)

286.60 lbs (130 kg)


3. Ventilation & Thermal Management

  • Ventilation Type: Active cooling with high-efficiency fan
  • Fan Operation: Automatic temperature-triggered activation
  • Airflow Design: Supports heat dissipation during continuous or high-load charging
  • Purpose: Helps reduce heat buildup and maintain a more stable charging environment

4. Detection, Alarm & Fire Response

  • Smoke Detection: Integrated high-sensitivity smoke sensor
  • Alarm Type: Audible early-warning alarm
  • Automatic Power Cutoff: Cuts power during fault, leakage, or abnormal conditions
  • Fire Suppression: Built-in heat-triggered aerosol suppression module
  • Suppression Characteristics: Automatic activation 

Fire suppression is designed to assist containment and response. Always follow safe charging practices.

5. Construction & Materials

  • Steel Construction: 18-gauge industrial-grade steel
  • Wall Design: Double-wall construction with air gap
  • Finish: Durable powder-coated surface
  • Door Hinges: Full-length heavy-duty piano hinges
  • Door Type: Manual Close

6. Grounding, Power & Cooling Components

  • Grounding Connection: Dedicated grounding point to help reduce static discharge risk
  • Cooling Fan: Continuous-duty fan designed for charging environments
  • Internal Power Layout: Organized cable routing for chargers and adapters

7. Security, Mobility & Access

  • Locking System: Flush mounted door handle – locking at three positions with two keys
  • Wheel: Heavy-duty 360° Swivel Casters (2 Locking, 2 Non-locking)
  • Wheel Diameter: 50mm
  • Wheel Load Capacity: 50kg per wheel
  • Mobility: Designed for repositioning in apartments, garages, and workshops
  • Door Opening: Wide-opening doors for easy battery handling

8. Installation & Placement Guidelines

  • Intended Use: Indoor environments (apartments, garages, workshops)
  • Placement: Flat, stable surface with ventilation clearance
  • Recommended Clearance: Allow at least 100mm (4 inches) of space at the rear and sides for ventilation.
  • Not Recommended: Outdoor exposure, wet environments, damaged or swollen batteries

9. What’s Included

  • Battery charging cabinet (fully assembled)
  • Power Cord with Built-in GFCI Switch
  • Smoke Alarm (Battery Included)
  • Keys
  • Casters
  • Grounding Wire

10. Warranty & Support

  • Warranty: 5-year warranty on structural components and a 1-year warranty on serviceable parts.
  • Replacement Parts: Available for key safety components
  • Support: Technical assistance available before and after purchase
  • Approval: EN 14470-1 Type 90, EN 14470-2, and EN 1363-1, CE, RoHS

Before You Buy – Fit Check (Recommended)

To ensure compatibility and reduce delays, please confirm the following before ordering:

  • Battery type and approximate dimensions
  • Number of batteries charged simultaneously
  • Charger wattage and plug type
  • Installation environment (apartment / garage / workshop)

If unsure, contact our support team with photos or details and we’ll help confirm the right model.